ART SLA 1 - 100W Studio Power Amplifier from ART New

Merchant: Gear 4 Music
Brand: ART
Product code: ART-SLA1E4
Merchant's Category: Musical Instruments

The ART SLA 1 is a true linear amplifier ideal for powering passive speakers. Featuring two female XLR sockets and two TRS inputs as well as binding post outputs you can choose to bridge channels one and two. This allows you to enter either stereo mode or bridged mono amplifier mode that delivers the full power in a single 8 Ohm load. Safe from short circuits and overloading the SLA 1 features an ultrasonic network that decouples the RF from the output. Even with low impedance the SLA 1 is stable supporting 4 Ohm loads. Linear amplifiers require a considerable amount of power to operate because of this they generate heat that can lead to problems. The SLA 1 utilises a SmartFan cooling system that measures its ambient temperature and adjusts itself accordingly to lower it to an optimal operating temperature. On the front of the SLA 1 are two pop-up gain knobs that you can use to attenuate the level of each channel you can cover these with an included anti-tamper faceplate once tuned to your equipment. Powered By an IEC cable and taking up only 1U of rack space the ART SLA 1 is an essential unit for any passive speaker system.
More details from Gear 4 Music

Promotion: A powerful amp for passive monitors Despite most studio setups incorporating active and powered monitoring systems you may prefer to use passive speakers to create and mix your music. If you own a passive monitoring system chances are you need a linear amplifier to power your speakers without interrupting or distorting the input signal. Providing superior sound quality the SLA-2 is a 200 Watt two-channel linear studio power amplifier with four multi-way binding post outputs that support standard speaker cables. On the front panel are two recessed "pop out" gain attenuators that can be pre-set and then shielded with an included anti-tamper faceplate. Utilising toroidal transformers the SLA 1 has a frequency range response of 10Hz to 40kHz. Versatile and innovative design To reduce interference and protect it from short circuits the ART SLA 1 is constructed with extremely low noise components and signal isolating circuitry an ultrasonic network decouples RF from the output to provide stability and prevent overloading with reactive loads. Additionally the SLA 1 is extremely stable with low impedance loads. it can support loads as low as four Ohms allowing you to connect a wider range of equipment that output quieter signals. With two different operating modes you can bridge channels one and two to obtain either stereo mode or bridged mono mode which delivers the full power of the amp in an 8 Ohm load. Featuring two female XLR sockets and two TRS jack inputs you can connect almost any instrument or interface to the SLA 1 with ease and utilise the amp mode switch to change the amplifier operating mode. Intelligent SmartFan cooling Linear amplifiers maintain signal purity and integrity from the input to the output speaker to do this they draw a lot of power and the resulting accumulated heat from this can cause immediate and long-term hardware issues. To combat this the SLA 1 utilises SmartFan a thermal-dependent fan and convection cooling system that regulates the temperature of the amplifier based its the internal ambient heat to prevent the unit from overheating and malfunctioning. Powered by an IEC cable and turned on/off with a switch on the front the SLA 1 is incredibly easy to set up and use. Taking up only 1U of rack space this compact high-quality and no-nonsense amplifier is the perfect tool to power your passive speakers in any studio or commercial application. Features Two channel linear amplifier for powering passive speakers and studio monitors Professional grade linearity maintains input signal purity and integrity Choose between stereo and mono bridge amp modes for signal combination Low noise circuitry ensures minimum interference with audio signals Inputs include Female XLR sockets and four balanced TRS jacks Multi way binding post outputs that host regular speaker cable and banana plugs 10Hz to 40kHz frequency response SmartFan cooling system regulates heat based on the internal ambient temperature Specifications Bridged Output Power 8 Ohms: 260 W RMS mono CMRR:> 60dB (typical @1kHz) Frequency Response: 10Hz to 40kHz +/- 0.5dB Total Harmonic Distortion: 100dB below clipping Input Impedance: 44k Ω (balanced) / 22k Ω (unbalanced) Input Sensitivity: 1V for full power output into 8 Ω Input/Output Connections: XLR Euroblock (bal) 1/4″ TRS (bal/unbal) Stereo Output Power 4 ohms: 130 W RMS per channel Stereo Output Power 8 ohms: 100 W RMS per channel Transformer Type: Toroidal Dimensions (WxDxH): 44.5mm x 483mm x 190.5mm Weight: 6kg Power Requirements: 120VAC 60Hz 600 W (max) Product code: ART-SLA1E4

Follow Gear 4 Music to get news updates and products on your homepage.