Aspire PockeX Vape Kit from Aspire New
Merchant: 88Vape
Brand: Aspire
Merchant's Category:
The Aspire PockeX is the ultimate pocket All-in-One (AIO) device. Designed by Aspire, the PockeX vape kit is a sub-ohm device but with a discrete size and low-profile sub-ohm vapour production. Installed with a 0.6O (Ohms) stainless steel PockeX U-Tech coil and with a wide Delrin drip-tip and top-airflow, this allows for increased vapour production. With two different coils included in the kit, this device can be used for mouth to lung (MTL) and direct to lung (DTL) vaping. New vapers typically use mouth to lung with tighter airflow as this inhaling technique is closer to how a cigarette feels. In this instance, they would look to use the higher resistance coil and high nicotine strength e-liquid with a greater PG (propylene glycol) ratio as can be found in our standard PG e-liquid range. Features Easy top-fill - unscrew the top cap, fill to the max fill line and replace the cap Top Airflow 1500mAh inbuilt battery - more than five times the battery capacity of traditional cigarette-style e-cigarettes Excellent vapour production Leak-free design Lightweight and discreet in size Re-chargeable via USB 0.6Ohm 316L Stainless Steel PockeX X U-tech coil (18-23w) 2ml Tank capacity Size: 11.77cm x 1.97cm Official Aspire product - buy in confidence Aspire PockeX kit Includes 1 x Aspire PockeX Kit 1 x 0.6O (Ohms) Aspire PockeX Coil (Pre-installed) - for flavour and vapor production 1 x 1.2O (Ohms) Aspire Pockex Coil (Spare) - for mouth to lung vaping and higher nicotine strengths 1 x Micro-USB charger 1 x Instruction manual 1 x Warranty Card When using the sub-ohm coils (below 1Ohm), we advise that you decrease your nicotine level as a sub-ohm vape is more efficient and vaporises more e-liquid per draw. We recommend using a 0%, 0.3% or 0.6% w/v nicotine e-liquid in a 50-50 or VG heavy base. While you can sub-ohm with higher nicotine levels, most vapers will find the throat hit too harsh. Aspire PockeX - Customer Questions & Answers What coils does the Aspire PockeX use?Aspire Pockex Coils are available in 2 resistances, 0.6O 316L stainless steel coil for flavour and vapour production and the 1.2O Kanthal coil for higher nicotine strengths. How long do I need to wait after installing a new coil?After installing a new coil or before using the device for the first time, please allow up to 3 minutes after filling to saturate the wicking material, failure to do so is liable to add a burnt taste to the vapour and impact flavour negatively. How long does a PockeX coil typically last?The lifespan of a coil varies based on the type e-liquid used and how much liquid has passed through the coil. Feedback from customers is that they usually change their coil once a week, but we have had reports of some people getting months out of their coils. We recommend changing the coil when the vapour does not taste how you expect it to or if it tastes burnt. Sweeter liquids might also reduce the length of time a coil will last. What e-liquid can I use in the PockeX?With the lower resistance coil (0.6O), we recommend a high 70% VG e-liquid and lower nicotine strength. The higher resistance coil (1.2O) is suitable for 50/50 PG/VG e liquids and stronger nicotine strengths. Why is my PockeX spitting hot liquid in my mouth?Usually, this is due to the coil heating the e-liquid but not quite vaporising it and the hot liquid reaching the mouth. This excess liquid causes the device to flood, which disrupts the flow of vapour. Often, this will clear on its own, but in cases where it does not, we recommend uninstalling the coil and removing excess liquid. If this still does not work, it might be time to change the coil. Another cause of this flooding is if the e-liquid is too 'thin' ( low viscosity), wicking too quickly and the coil can not keep up with demand. How long does the PockeX take to charge?Usually around 2 hours. How do I charge the PockeX?This device must only be charged using the supplied USB charging cable and plugged into a 5v 1A USB. Most common USBs found on computers and laptops or the official Aspire UK Wall Plug. Other brand USB adapters or mobile phone/ tablet adapters are NOT to be used as they might damage the battery. How does the 5 click on/off function work?If the device is on, pressing the activate button 5 times in quick succession will put the device in power off mode, this stops accidental activation when not in use. To turn the battery back on, you repeat the process. You will need to power on new devices usually, using the 5 click method. This action is standard in vaping devices, some manufacturers use 3 click on/off but Aspire use 5 clicks.
More details from 88Vape
Follow 88Vape to get news updates and products on your homepage.
88Vape is being followed by 0 people.
Follow 88Vape
Delivery Details
Specific details for this product: No specific details given.General Delivery details for 88Vape:
No review added yet - be the first!
Reviews and Comments
If you own this product already, please write a quick review to help others:
Current Special Offer at 88Vape:
Free UK Delivery On Orders Over £15
Comments and Feedback
This is an experimental quick comments form. Please use it to point out a mistake, tell us about a closed shop or a quick comment about the page you are on. Any comment/feedback left here may be added to the page if it is helpful.
88Vape
Read more about 88Vape
Seen our �1 eliquids and Short Fills on billboards, bus stops and in leading supermarkets? Well this our online vape store!