Dynacord PowerMate 2200 22 Channel Powered Mixer from Dynacord New

Merchant: Gear 4 Music
Brand: Dynacord
Product code: F.01U.131.115
Merchant's Category: Musical Instruments

The Dynacord PowerMate 2200-3 is a powerful expanded take on Dynacords powered mixers thats the perfect heart of any live mixing setup. Featuring two amplifier stages for left and right speakers ideal for adding the punch you need for passive speakers without investing in a separate power amp. The PowerMate offers 1000 W of power per speaker with low impedance for clear crisp audio quality that translates your mixes perfectly. The 2200-3 features 22 channels with high-performance preamps that deliver clean clear audio with minimal noise. The PowerMate offers 18 mono channels and 4 stereo channels making signal routing simple and easy. Two effects send controls two aux sends and two monitor sends across all channels makes further processing extremely easy making this perfect as a monitoring hub or as a front-of-house desk. Rounded out by a USB audio interface with four playback channels four recording channels and MIDI compatibility this mixer is incredibly connective and expandable. This powered mixer also provides a staggering range of processing options with fixed 80 Hz low-cut filter and voice filter on mono channels for cleaning up sounds and three-band EQ with a sweepable mid control for further sound sculpting. The desk also features a stereo graphic EQ that can be routed to the master channel or either of its two monitor outputs for extra precision. To add that final touch of quality to your mixes the PowerMate also features dual effects units with 100 factory presets 20 user slots and adjustable parameters to complete any sources you send to it with reverbs delays or modulation.
More details from Gear 4 Music

Promotion: Clean clear amplification Utilising powerful Class D amplification the PowerMate can provide up to 1000 watts of power per amplifier. This technology removes the need for heat sinks improving efficiency so more functionality can be packed into the unit whilst making it lighter and more easy to transport. An ideal solution for travelling engineers touring bands festivals or installation as the heart of a live venues audio setup this mixer is incredibly adaptable. Extreme connectivity The 1600-3 offers 18 mono channels with 4 stereo channels as well as two aux sends effects sends and monitor sends per channel. This makes it incredibly simple to use and flexible. Perfect for expanding with other signal processors input sources as a sidecar mixer or purely for monitoring. However its still great for front-of-house mixing too. Plus a built-in USB audio interface with four playback channels four recording channels lets you play backing tracks or playlists from computers or tablets capture live sets in their entirety or record in studio spaces. MIDI functionality via this USB connection also allows you to run keyboards or synthesizers live. Deep processing possibilities The final finishing touches and extra polish to really bring the best out of live sets relies on both internal and external processing options offered by your mixer of choice. The PowerMate shines here too with two aux sends on each channel allowing connections to outboard gear as well as its dual built-in effects units. The PowerMate range has become beloved for its reverbs which are all present on this powered model as well as delay and modulation effects letting you add space and depth to any sound source. 100 factory presets and 20 user slots give you plenty of flexibility for saving and loading your own custom effects chains or picking pre-designed ones by Dynacord for quickly achieving great-sounding mixes. Features 22-channel powered mixer ideal for live sound applications and running passive speakers Class D amplification stage delivers 1000 W of clean efficient power per speaker Low 4Ω impedance provides clear full sound 22 high-grade low-noise preamps capture and reproduce sound accurately Six auxilliary buses with two switchable pre or post-fader Pre-fader listening switch per channel for easy monitoring Two built-in effects processors offer access to delays reverbs and modulation 100 factory presets and 20 user slots for loading and saving effects Phantom power for running condenser microphones Two aux sends monitor sends and FX sends per channel 18 mono channels with three-band EQ with sweepable mid and pan controls 4 stereo channels with balance controls and three-band EQ with fixed bands Powered desk lamp input for easier control under dim conditions RCA connectivity to CD players and 2-track tape machines Record send allows you to capture live sets to a range of recording devices Built-in USB audio interface with 4 playback tracks for audio input and 4 recording tracks for audio output MIDI via USB also available on interface ideal for running samplers drum machines keyboards or synthesizers live Monitor outputs for creating separate monitor mixes for on-stage playback Perfect for front-of-house mixing or running a separate monitor station Specifications Channels (Mono + Stereo): 18 + 4 Auxiliaries (MON FX AUX): 2 Pre 2 Post 2 Pre/Post Switchable Max. Single Channel Output Power Dynamic-Headroom IHF-A: Into 2.66&Ω: 2 x 1600 W Into 4Ω: 2 x 1250 W Into 8Ω: 2 x 675 W Max. Single Channel Output Power Continuous 1 kHz THD = 1%: Into 2.66&Ω: 2 x 1350 W Into 4Ω: 2 x 1150 W Into 8Ω: 2 x 650 W Maximum Midband Output Power 1 kHz THD = 1% Dual Channel: Into 2.66&Ω: 2 x 1350 W Into 4Ω: 2 x 1000 W Into 8Ω: 2 x 600 W Rated Output Power 20 Hz to 20 kHz THD < 0.5% Single Channel: Into 4Ω: 2 x 900 W Into 8Ω: 2 x 450 WMaximum Output Voltage of power amplifier 1 kHz no load: 74 V RMS THD at 1 kHz MBW = 80 kHz: MIC input to Master A L/R outputs +16 dBu typical: <0.005% POWER AMP INPUTS to Speaker L/R outputs: <0.075% DIM 30 power amplifier 3.15 kHz 15 kHz: <0.05% IMD-SMPTE power amplifier 60 Hz 7 kHz: <0.15% Frequency Response -3 dB ref. 1 kHz: Any input to any Mixer output: 15 Hz to 70 kHz Any input to Speaker L/R output: 20 Hz to 30 kHz Crosstalk 1 kHz: Amplifier L/R: < -85 dB Channel to Channel: < -80 dB Mute- & Standby-Switch attenuation: > 100 dB Fader & FX/AUX/MON-Send attenuation: > 85 dB CMRR MIC input 1 kHz: > 80 dB Input Sensitivity all level controls in max. position: MIC: -74 dBu (155 µV) LINE (Mono): -54 dBu (1.55 mV) LINE (Stereo): -34 dBu (15.5 mV) CD (Stereo): -34 dBu (15.5 mV) POWER AMP INPUTS: +8 dBu (1.95 V) Maximum Level mixing desk: MIC inputs: + 21 dBu Mono Line inputs: + 41 dBu Stereo Line inputs: + 30 dBu All other inputs: + 22 dBu All other outputs: + 22 dBu Input Impedances: MIC: 2 kΩ Insert Return: 3.3 kΩ 2-Track Return and CD In: 10 kΩ All other inputs: > 15 kΩ Output Impedances: Phones: 47Ω All other outputs: 75Ω Equivalent Input Noise MIC input A-weighted 150 ohms: -130 dBu Noise Channel inputs to Master A L/R outputs A-weighted: Master fader down: -97 dBu Master fader 0 dB Channel fader down: -89 dBu Master fader 0 dB Channel fader 0 dB Channel gain unity: -81 dBu Signal/Noise-Ratio power amplifier A-weighted 4Ω: 105 dB Output Stage Topology amplifier: Class D Equalization: LO Shelving: ±15 dB / 60 Hz MID Peaking mono inputs: ±15 dB / 100 Hz to 8 kHz MID Peaking stereo inputs: ±12 dB / 2.4 kHz HI Shelving: ±15 dB / 12 kHz Master EQ 11-band: ±10 dB / Q = 1.5 to 2.5 (63 125 250 400 630 1k 1.6k 2.5k 4k 6.3k 12kHz) Filter: LO-CUT mono inputs: f = 80 Hz 18 dB/oct. VOICE FILTER mono inputs: switchable FEEDBACK FILTER MON 1/2: 70 Hz to 7 kHz Notch -9 dB Speaker Processing: LPN switchable Effects: Type: Dual stereo 24/48-bit multi effects processors Effects presets: 100 Factory + 20 User Tap-Delay Remote control: Footswitch MIDI Display: 128 x 64 pixels OLED Digital Audio Interface: Channels: 4 In / 4 Out AD/DA Conversion: 24-bit Sampling Rate: 44.1 / 48 / 88.2 / 96 kHz PC Interface: USB 2.0 Female Type B Supported OS: Windows: Windows Vista 7 8 and 10 both 32- and 64-bit versions MacOS: Mac OS X (Intel) V2.0.7 Mac OS X (Intel) V2.1.7 Mac OS X Mountain Lion Mac OS X Yosemite Mac OS X High Sierra. Support for Mac OS X Big Sur (11.0) is not available. Peak Display: 6 dB before Clip MIDI Interface: 5-pin DIN connector In / Out Output Power Control (Speaker Protection): Adjustable longterm RMS limiter Protection: Mixer Outputs (Relay controlled): MON 1 MON 2 MASTER A Amplifier: Audio Limiters High Temperature DC HF Short Circuit Peak Current Limiters Turn-on Delay Back EMF Switching Mode Power Supply (μC controlled): Inrush Current Limiters Mains Over/Undervoltage Mains Over Current High Temperature Cooling: Continuous speed controlled fans Phantom Power switchable in groups: 48 V DC Power Requirements (SMPS with auto range mains input): 100 V to 240 V AC 50 Hz to 60 Hz Power Consumption at 1/2 maximum output power 4Ω: 450 W Safety Class: I Ambient Temperature Limits: +5°C to +40°C (40°F to 105°F) Dimensions (W x H x D): 818.5 x 155.0 x 498.5 mm Weight: Net Weight: 18 kg Shipping Weight: 22 kg Warranty: 36 months

Follow Gear 4 Music to get news updates and products on your homepage.