Dynacord SL 1800 2 x 900W Power Amp from Dynacord New

Merchant: Gear 4 Music
Brand: Dynacord
Product code: F.01U.076.855
Merchant's Category: Musical Instruments

The Dynacord SL 1800 is a dual 900 W power amplifier for live sound. Ideal for powering compact passive speakers that operate on 900 W or less the SL 1800 is a stable and reliable amp for mobile and installation sound alike. The SL range amplifiers offer three different impedances 2 ohm 4 ohm and 8 ohm for huge flexibility all with different levels of power output to fit any system. The SL 1800 also boasts comprehensive protection circuitry including dynamic limiting to prevent overloading speakers. Dynacords Low-Pass Notch filtering improves frequency response and transient response of any speakers it powers too resulting in a clearer punchier sound.
More details from Gear 4 Music

Promotion: Clean clear amplification The SL 1800 is a highly efficient power amp for powering passive PA speakers with great stability to bring the very best possible sound. Portable and compact but also well-suited to permanent installation in venues this amplifier can adapt to any venue or sound system you need it to. Improve your sound The SL 1800 comes equipped with a wide-ranging set of protection circuitry and dynamic limiting to ensure power sent to speakers remains consistent and clean. Combined with Dynacords special Low Pass Notch filtering to improve transient response and tailor the frequency response of the speakers it drives this amplifier will make your system sound its very best. Features Dual 900 W power amplifier for powering passive PA speakers Three impedance options from 2 ohm 4 ohm and 8 ohm modes Outputs 1250 W at 2 ohms 900 W at 4 ohm and 550 W at 8 ohm Efficient and stable power output for clean clear sound Compact and portable rack mount unit suitable for touring or venue installation Advanced protection package and dynamic limiters to prevent overload and keep power clean Low-Pass Notch filter adjusts frequency response and improves transient response of speakers Adjustable power level per channel LED metering with limiter warning lights Convenient power switch Specifications Maximum Midband Output Power THD = 1% 1 kHz Dual Channel: 1250 W (@ 2Ω load impedance) 900 W (@ 4Ω load impedance) 550 W (@ 8Ω load impedance) Rated Output Power THD < 0.1% 20 Hz to 20 kHz: 800 W (@ 4Ω load impedance) 400 W (@ 8Ω load impedance) Maximum Single Channel Output Power Dynamic-Headroom IHF-A: 2450 W (@ 2Ω load impedance) 1400 W (@ 4Ω load impedance) 700 W (@ 8Ω load impedance) Maximum Single Channel Output Power Continuous 1 kHz: 1700 W (@ 2Ω load impedance) 1100 W (@ 4Ω load impedance) 630 W (@ 8Ω load impedance) Maximum Bridged Output Power THD = 1% 1 kHz: 2800 W (@ 4Ω load impedance) 1800 W (@ 8Ω load impedance) Maximum RMS Voltage Swing THD = 1% 1 kHz: 78.8 V Power Bandwidth THD = 1% ref. 1 kHz half power @ 4Ω: < 10 Hz to 30 kHz Voltage Gain ref. 1 kHz: 32.0 dB Input Sensitivity rated power @ 8Ω 1 kHz: +5.1 dBu (1.39 V RMS) THD at rated Output Power MBW = 80 kHz 1 kHz: < 0.03% IMD-SMPTE 60 Hz 7 kHz: < 0.1% DIM30 3.15 kHz 15 kHz: < 0.05% Maximum Input Level: +21 dBu (8.69 V RMS) Crosstalk ref. 1 kHz at rated output power: < -80 dB Frequency Response ref. 1 kHz: 10 Hz to 40 kHz (±1 dB) Input Impedance active balanced: 20 kΩ Damping Factor 1 kHz: > 300 Slew Rate: 27 V/µs Signal to Noise Ratio A-weighted: > 109 dB Output Noise A-weighted: < -71 dBu Output Stage Topology: Class H Power Requirements: 240 V 230 V 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption 1/8 maximum output power @ 4Ω: 700 W Mains Fuse: 240 V / 230 V: T15AH; 120 V / 100 V: T25AH Protection: Audio limiters High temperature DC HF Back-EMF Peak current limiters Inrush current limiters Turnon delay Cooling: Front-to-rear 3-stage-fans Ambient Temperature Limits: +5°C to +40°C (40°F to 105°F) Safety Class: I Dimensions (W x H x D): 483 x 88.1 x 421.5 mm Weight: 16.3 kg (35.9 lbs) Signal Processing: LPN switchable

Follow Gear 4 Music to get news updates and products on your homepage.