Hyundai 160A TIG MMA ARC Inverter Welder Single Phase 230V HYTIG160 from Hyundai :: Buy from Hyundai Power Equipment on The UK High Street

This product is sold by Hyundai Power Equipment

Price at Hyundai Power Equipment:

£199.99

Merchant: Hyundai Power Equipment
Brand: Hyundai
Merchant's Category: Garage Equipment

160 Amp TIG/MMA/ARC Inverter Welder The HYTIG-160 is a lightweight and incredibly versatile single phase MMA / TIG welder from Hyundai. Light And Portable Inverter Welder Weighing 12kg, the HYTIG-160 is easy to carry around thanks to its adjustable harness and lightweight pressed steel case with powder coated finish for extra corrosion resistance. Accessories include TIG welding torch with 4m cable, electrode holder with 2m cable, earth clamp with 1.5m cable, chipping hammer and wire brush making the HYTIG-160 extremely cost effective. Stepless Regulator The HYTIG-160 TIG welder features a stepless regulator for infinite variable control of the welding current with a low current facility for effective welding of thinner materials. The welding (output) current of the HYTIG-160 can be regulated within the range of 20-160 Ampere making the HYTIG-160 adjustable to suit welding different materials and thicknesses of steel. Information On Duty Cycle Beware of lower quality models by always checking the andlsquo;Duty Cycleandrsquo;. Duty cycle is the amount of time, within a 10 minute period the welder can be used, on a given output. For example, our 160A welder has a duty cycle of 60% when used on 160A output (TIG). Duty cycles for the Hyundai welder range shown below: Model Output Amperage / Duty Cycle / Period of use within 10 minute period MMA120 70A / 100% / 10minutes 90A / 50% / 6minutes 120A / 35% / 3.5minutes MMA160 95A / 100% / 10minutes 120A / 50% / 6minutes 160A / 35% / 3.5minutes MMA200P 155A / 100% / 10minutes 200A / 60% / 6minutes andnbsp; TIG160 124A / 100% / 10minutes 160A / 60% / 6minutes andnbsp; TIG200 155A / 100% / 10minutes 200A / 60% / 6minutes andnbsp; MIG180 105A / 100% / 10minutes 140A / 60% / 6minutes 180A / 35% / 3.5minutes Cheaper, lower quality welders claim to be a certain Amperage output, but can have a very low duty cycle on the output they have claimed. Always check the duty cycle to ensure you are getting the best value for money. TIG Welder with inverter technology and thermal overload protection Inverter Welder Technology The inverter technology used within the Hyundai welders has certain advantages compared to more traditional transformer welders. The inverter type welders are usually lighter, more cost effective and usually require less input power for a comparable output. This makes them more cost effective not only to purchase, but also to run. Thermal Overload Protection Fitted with thermal overload protection to ensure maximum durability. Suitable for welding steel, stainless steel, copper, nickel, titanium and their alloys. All Round Welder Suitable for fabricators, farmers, home mechanics, mobile technicians and DIY enthusiasts the HYTIG-160 is a good all rounder for welding with rods up to 4mm. The HYTIG-160 features high frequency starts allowing for smooth arc strikes. Low Service And Maintenance With low service and maintenance requirements, the HYTIG-160 is incredibly easy to use and maintain, and has full Hyundai UK parts back up. In The Box TIG welding torch with 4m cable Electrode holder with 2m cable Earth clamp with 1.5m cable Chipping Hammerandnbsp; Wire Brush Know Your Welder (MMA) Manual Metal Arc - Manual Metal Arc Welding (MMA) or (MMAW) Manual Metal Arc Welding is flux shielded arc welding or informally as stick welding, is a manual arc welding process that uses a consumable electrode covered with a flux to lay the weld. (TIG) Tungsten Inert Gas - Tungsten Inert Gas Welding (TIG) or (GTAW) Gas Tungsten Arc Welding is an arc welding process that uses a non-consumable tungsten electrode to produce the weld. (MIG) Metal Inert Gas - Metal Inert Gas Welding (MIG), (GMAW) Gas Metal Arc Welding or (MAG) Metal Active Gas is a welding process in which an electric arc forms between a consumable wire electrode and the workpiece metal(s), which heats the workpiece metal(s), causing them to melt and join. Warranty Covered by a Hyundai 2 year platinum warranty. Key Features Light and robust MIG / Arc / TIG Welder Variable DC output of 10Amp to 160Amp (TIG), or 10Amp to 160Amp (MMA/ARC) Electrode size 1mm to 4mm Duty cycle of 100%@124A / 60%@160A (TIG), or 60%@160A (MMA/ARC) Advanced inverter technology Latest MOSFET Technology (Metal Oxide Semiconductor Field Effect Transistor) Stable and reliable welding current Fitted with thermal overload protection, Anti-stick and hot start functions Includes welding rod holder, earth clamp and cables A great value welder for mechanics, mobile technicians, farmers and DIY enthusiasts Covered by a Hyundai 2 year platinum warranty. Full UK service and parts operation to maintain your welder for years to come.
More details from Hyundai Power Equipment

Follow Hyundai Power Equipment to get news updates and products on your homepage.

Hyundai Power Equipment is being followed by 0 people.

Follow Hyundai Power Equipment

Hyundai 160A TIG MMA ARC Inverter Welder Single Phase 230V HYTIG160 from Hyundai

Delivery Details

Reviews and Comments

5% OFF ALL ORDERS

Comments and Feedback

Hyundai Power Equipment