Kolink Inspire Series K12 Midi Tower ARGB ATX Gaming Case - Black Window from KOLINK
Merchant: Technextday
Brand: KOLINK
Product code: INSPIRE K12
Merchant's Category: PC Components, ATX Cases
With the Kolink Inspire K12 Mid-Tower PC Case, you no longer have to choose between aesthetics and airflow. This chassis is the first from the Kolink Inspire Series to integrate both ARGB lighting and airflow features into one model. Enjoy vibrant lighting from the pre-installed Kolink Umbra S ARGB/PWM 120mm fan and the two LED strips illuminating the front mesh panel. Plus, with support for up to ATX motherboards, 330mm long GPUs, and water-cooling systems, this PC case is perfect for housing powerful gaming hardware.KOLINK INSPIRE SERIES K12 ARGB MID TOWER PC CASE AT A GLANCE:Mid-tower PC case with mesh front panel and ARGB LED stripsSupport for up to ATX motherboards and 330mm long GPUsOne pre-installed Kolink Umbra S ARGB/PWM 120mm fanAccommodates up to four storage drivesMagnetic, hinged tempered glass half panel for easy accessFully featured I/O panel including USB 3.1INSPIRATIONAL AESTHETICSThe Kolink Inspire Series is known for its bold aesthetics, bright RGB lighting, and all-around stylish good looks. The Kolink Inspire K12 Mid-Tower PC Case fits the trend, but is the first of the series to focus on airflow in equal measure. The front panel features mesh panelling, accented by two ARGB LED strips. This lighting is paired with a pre-installed Kolink Umbra S ARGB/PWM 120mm fan, mounted upon the back panel. Both these devices can be synced and controlled utilising the reset button or compatible motherboard software.Forming the perfect backdrop to this lighting is the classic matte black finish on the metal frame. To showcase your high-end hardware, the Kolink Inspire K12 has a half-panel tempered glass door, hinged for easy access and held in place with magnets instead of screws. This panel is also tinted, for a sophisticated finish.INSPIRED AIRFLOWIn addition to the mesh panelling, the Kolink Inspire K12 has extensive support for both air and water-cooling, as well as a fully ventilated PSU shroud. The front panel can support either three 120mm or 140mm fans. Alternatively, radiators up to 360mm long can be mounted here instead. Upon the ceiling there is space for two fans of either size or a slim 240mm radiator, and smaller. The pre-installed 120mm fan rests on the rear panel and can be replaced with a radiator of the same size. What’s more, there are two 120mm fan mounts on the PSU shroud, to further enhance the cooling in that secondary chamber. Finally, there is clearance for CPU coolers up to 160mm tall.HARDWARE INSPOThe Kolink Inspire K12 is more than just a beautiful PC case. This chassis is intelligently designed to support an astounding range of gaming hardware. The backplate can accommodate motherboards in ATX, Micro-ATX, and Mini-ITX form factors, with seven PCIe expansion slots on the rear panel. There is clearance for GPUs up to 330mm in length, ensuring the chassis compatible with a wide selection of graphics cards that are currently available. The ventilated PSU shroud has space for power supplies up to 180mm long.For storage, up to four drives can be installed within the Kolink Inspire K12. There are two brackets that can support either 2.5” SSDs or 3.5” HDDs, as well as two removeable SSD trays on the back of the motherboard plate. This allows for a flexible storage solution that is both fast and has ample capacity.INSPIRE FUNCTIONALITYTo make cable management easier, the Kolink Inspire K12’s I/O panel is mounted on the side. This allows for better cable routing to the motherboard. This I/O panel includes two USB 2.0 and one USB 3.1 port, along with an HD audio jack.Helping to prevent dirt build up, the Kolink Inspire K12 Mid-Tower PC Case is equipped with two dust filters. The first is located on the top panel and is magnetic, to enable you to easily remove and clean the filter. The second dust filter is found at the bottom of the chassis.KOLINK INSPIRE SERIES K12 ARGB MID-TOWER PC CASE SPECIFICATIONS:Brand KolinkModel Inspire K12 ARGB Mid-Tower PC CaseMaterials Tinted tempered glassMetalABSPVCMotherboard Support Mini-ITX / Micro-ATX / ATXPCIe Slots 7GPU Clearance 330mmPSU Support 180mm clearanceVentilated shroudPre-Installed Fans Rear: 1 x Kolink Umbra S ARGB PWM 120mm FanFan Support Front: 3 x 120mm / 3 x 140mm fansTop: 2 x 120mm / 140mm fansRear: 1 x 120mm fanPSU Shroud: 2 x 120mm fansRadiator Support Front: 360 / 280 / 240 / 140 / 120mm radiatorTop: 280 / 240 / 140 / 120mm slim radiatorCPU Cooler Up to 160mm tallDust Covers Magnetic dust cover on topPVC dis
More details from Technextday
Follow Technextday to get news updates and products on your homepage.
Technextday is being followed by 0 people.
Follow Technextday
Delivery Details
Specific details for this product: 1General Delivery details for Technextday:
No review added yet - be the first!
Reviews and Comments
If you own this product already, please write a quick review to help others:
Current Special Offer at Technextday:
Comments and Feedback
This is an experimental quick comments form. Please use it to point out a mistake, tell us about a closed shop or a quick comment about the page you are on. Any comment/feedback left here may be added to the page if it is helpful.
Technextday
Read more about Technextday
TechNextDay offers quality custom PC components and exceptional customer service. With a commitment to excellence, we dedicate ourselves to providing you with a hassle-free shopping experience. We provide easy-to-navigate product pages, a streamlined checkout process, and fast and reliable delivery. Our unparalleled customer service team is always available to answer any questions or concerns you may have. At TechNextDay, we're not only a seller of PC components, but also a partner in your passion for computing. We earn the loyalty of tech enthusiasts and everyday online shoppers alike through our unwavering commitment to quality, service, and customer experience.