QSC PL380 Power Amplifier from QSC New

Merchant: Gear 4 Music
Brand: QSC
Product code: PL380
Merchant's Category: Musical Instruments

Designed for the most demanding situation. The QSC PL380 Power Amplifier offers unmitigated power to keep your venue you up and running smoothly. It features Class D topology three-position input gain switch DataPort connectivity and XLR and Block input connectors. As well as this it also features deep surge protection. As it is the centre point of your music installation it is important to keep things powered up and without fault. If thats not enough it also features groundbreaking PowerLight technology which drastically reduces weight and eliminates hum. Its a must-have if you want reliable sound at your concert venue.
More details from Gear 4 Music

Promotion: Efficient power unit Give your live set up the power it needs - with efficiency and stability. Dubbed Ultimate Analog this power amplifier is ideal for powering your house sound. Allowing you to power your venue for concerts and live sound reinforcement. Regardless of the application youll find the PowerLight amplifier to be efficient and easy to use. With a wide range of features to help you get the most from your live sound system. Designed around your needs The Class D topology of this power amp provides a very efficient supply of power. It also comes with a three-position input sensitivity. This ensures that the gain can be matched across the existing amp racks and power amps you may have in your system. There are also user defeatable clip limiters and selectable low-frequency filters. Which give you plenty of control over the output of your sound. Built to last A power amplifier such as this is a big investment for your venue. QSC know this and have spare no expense in making sure the construction of this unit is up to scratch. It starts with the cooling system that has been designed specifically for this amplifier. It is a comprehensive internal system that keesp the air flowing smoothly so it naturally cools the amplifier. There is also a technologically-advanced system for making sure that surges are kept at bay. Buffering the over-current and protecting the amplifiers and loudspeakers in your system. Features PowerLight switch-mode power supply for the highest efficiency and improved audio performance Flow-through air path and solid aluminium heat sinks for maximum cooling DataPort supports remote network control and monitoring via Q-SYS Detented gain controls with 1-dB steps for precise calibration Removable knobs with lock-out security plate to prevent unauthorized tampering User defeatable clip limiters and selectable low-frequency filter per channel (3 Hz 30 Hz or 50 Hz) Three selectable gain structures (26 dB 32 dB or 1.2 V) Front and rear panel LEDs indicate the status of switch settings at a glance Parallel XLR/M and XLR/F connectors for simple loop-through connectivity Neutrik Speakon® and "Touch-Proof" binding post outputs Neutrik Powercon® power cable remains secure on the road 3-year warranty plus optional 3 years extended the service contract Linear Class H output circuit offer double the typical efficiency of Class B reducing AC current consumption and cooling requirements Specifications 8Ω EIA 1 kHz 1 THD: 1500 W 4Ω EIA 1 kHz 1 THD: 2500 W 2Ω EIA 1 kHz 1 THD: 4000 W* 8Ω EIA 1 kHz 1 THD: 5000 W 4Ω EIA 1 kHz 1 THD: 8000 W* Typical Distortion: (20 Hz–3 kHz 3 dB below clip or 20 Hz–5 kHz 10 dB below clip or 20 Hz–20 kHz 20 dB below clip) 8 ohms 0.01-0.03 4 ohms 0.03-0.06 2 ohms 0.1 Maximum Distortion (20 Hz–20 kHz 1 dB below rated power): 4 to 8 ohms 0.2 Frequency Response (8 ohms): 20 Hz–20 kHz ±0.2 dB Noise (20 Hz–20 kHz 32 dB Gain): -104 dB Dynamic Headroom (4 ohms): 2 dB Damping Factor (8 ohms): 200 Output Circuitry: Class D Input Sensitivity: 26 dB Setting 5.27V 32 dB Setting 2.67V Maximum Gain (1.2V setting): 39.1 dB Maximum Input Level: 1.2V setting 10 V (+22 dBu) 32 dBu setting 22 V (+29 dBu) 26 dBu setting 25 V (+30 dBu) AC Power Requirements: 120V 50/60 Hz 18 A 230V 50 Hz 11 A Cordset: 120V 50/60 Hz NEMA L5-30P 230V 50 Hz CEE 7/7 16A Chassis Power Connector: All Voltages 32A PowerCon Input Impedance: greater than 10 kΩ balanced or unbalanced Cooling: Variable-speed fan rear-to-front air flow Connectors (each channel): Input: XLR Male XLR Female and 3-pin detachable terminal blocks (1 each per channel) Output: Neutrik Speakon® (ch 1 wired to both channels) and 5-way binding posts DataPort: HD-15 input signal in parallel with XLR input connectors Front Controls: AC power switch Gain controls 21 detents 1 dB steps (each channel) Dimensions: Height: 3.5" (8.9 cm) 2RU Width: 19" (48.3 cm) Depth: 15.63" (39.7 cm) from front mounting rails Weight Net: 24 lb (11 kg) Shipping: 33.5 lb (15.2 kg)

Follow Gear 4 Music to get news updates and products on your homepage.